GeekVape Tab Pro Ohm Meter

50.65 $ 66.65 $

If you are building your own coils, ohm meters are handy accessories. On the one hand, it offers a stable platform for the atomizer base that will not overturn and on the other hand they are able to not only measure the resistance, but also heat up the coil. Their biggest problem – lack of pwoer - has now been solved by GeekVape with its new Tab Pro.

GeekVape Tab Pro allows you to measure coils from 0.05Ω and fire from 0.1Ω with up to 50W. It is powered by a single 18650 battery. Inside you will find a simple chip similar to those in basic box mods. What is it necessary for? The meter thread can be rotated by 90° to create a simple mod from the entire device, from which it is possible to directly vape. You do not need to unscrew the atomizer from the meter, screw it in your mod, try it out, and if thre is a problem, put it back on the meter, now it is possible to vape from the meter with a power of up to 50W.

Package contents and parameters

1x GeekVape Tab Pro

Package contents may change.

Dimensions: 94.6mm x 38.5mm x 24mm

Output power: max. 50W

Output voltage: max. 9V ± 0.1V

Resistance detection range: 0.05Ω-3.0Ω

Resistance fire range: 0.1Ω-3.0Ω

Measurable resistance deviation: 0.02Ω

Low voltage protection: 3.2V ± 0.1V

PCBA high temperature warning: 85°C

Heating time: max. 10 seconds

Battery: 18650 (at least 20A) - not included

Charging: micro USB port (5V/1A)

Package contents and parameters

Rotatable thread

The meter thread can be rotated by 90 °. It can be used as a classic meter, but also as a simple mod.

Rotatable thread

Battery

For the meter, prepare one 18650 battery. You can charge it via the micro USB port.

Battery

Ohm meter or mod

Do you want to try your coils? You no longer have to screw the atomize on your mod for a simple coil test. Simply turn the thread and Tab Pro will turn into a simple mod.

Ohm meter or mod